Skip to content
Alderwood Lock & Key SpecialistsRequest a visit
Open 24/7(289) 805-5275Call now
Person holding a long metal door-hardware assembly beside a cart of similar parts and a glass door fitted with a push bar. — Panic & Exit Hardware, New Toronto

Plan ahead Commercial · New Toronto

Panic & Exit Hardware in New Toronto

After the fit-out, the gym floor now holds more people than the old office space ever did, and the exit door at the back still has the same turn-lock it had when the room held desks.

Call now · open 24/7(289) 805-5275

Request a visit

In plain words

Sometimes the hardware is already there and simply needs honest attention. A crossbar that has stiffened, a dogging function that no longer holds, or a strike that has drifted out of line are common finds on a device that has been in service for years. The locksmith services what can be serviced, adjusts what has moved, and replaces only the parts that have genuinely worn out, so a functioning exit device is not swapped wholesale when a cleaning, an adjustment and new fasteners would restore it.

Sound familiar?

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way out.

How the visit goes

Panic & Exit Hardware · New Toronto

How the visit goes

Metal key-cutting machine with a key clamped in its vise, a clear guard over the cutter and a black handle. — New Toronto
  1. 1

    Is this door part of a pair?

    Single doors and pairs get assessed differently from the first look. On a pair, the locksmith checks whether a mullion currently splits the opening, whether a coordinator is already fitted, and whether the leaves close independently or in a set order. This decides whether the project is a straightforward device swap on each leaf or something larger, such as removing a mullion and fitting a compatible replacement latching arrangement to turn two narrow doors into one wide exit. Getting this right at the assessment stage avoids ordering hardware for a single door when the opening is really two leaves working together.

  2. 2

    Handling a pair of doors

    On a pair, a coordinator is fitted only where the hardware needs the leaves to close in a set order, letting the active leaf's device seat into the strike or into an astragal carried on the inactive leaf; many pairs latch independently and skip this step entirely. Where the plan calls for one wide exit instead of two narrow ones, the centre mullion is removed and vertical-rod devices are fitted to each leaf instead, arranged so both close and latch reliably. Either way, both leaves are tested together, not only on their own, before the visit is called finished.

  3. 3

    A maintenance rhythm worth keeping

    Exit devices are mechanical hardware and benefit from the same light attention as any other: a periodic check that the release force has not crept up, that the latch still seats fully, and that nothing has been added to the door that would block its exit function. Fire door assemblies carry their own inspection and testing rhythm, and folding the exit hardware into that same routine check keeps the whole opening, not just the lock, in the condition it was fitted in.

In the van

  • Through-fixings and mounting hardware
  • Astragal and mullion hardware
  • Outside trim (pull, lever or cylinder)
  • Door closer
  • Force gauge

What affects the quote

  1. 1

    Electrified functions added

    A request-to-exit switch or electric latch retraction adds wiring, a power source and coordination with the building's other systems, while a standalone alarm module can run on its own battery; each is priced alongside the mechanical installation itself.

  2. 2

    Removing hardware that should not remain

    A padlock, hasp or extra deadbolt found on the door is removed and the resulting holes are filled or covered as part of the same visit, which is its own small task in the quote.

  3. 3

    Signage and labelling

    Any exit signage or alarm labelling the opening needs is a small addition on its own, but it is named in the quote rather than assumed to already exist on the door.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 805-5275

Panic & Exit Hardware: questions

Advice · (289) 805-5275

What should I have ready before the visit?

Knowing the intended use of the room, roughly how many people it holds, whether any doors are already fire-rated, and whether any of them are part of a pair helps the locksmith bring the right devices. If a fire inspector or building official has already given a note about the opening, having that note or its reference number on hand keeps the visit focused on what was actually flagged.

What outside trim options exist for an exit device?

A plain pull suits a door nobody needs to lock from outside. A lever with a key cylinder lets authorized people turn the handle and enter while the inside stays a simple push. A keyed cylinder alone, without a lever, suits occasional entry where a full handle is not needed. All three leave the inside crossbar untouched, since the trim only ever affects the outside.

Can I still lock the door from outside?

Yes. The releasing device only governs the inside of the door; the outside gets its own trim, a pull, a lever with a cylinder, or a keyed cylinder alone, chosen for how that door is entered. Locking or unlocking that outside trim has no effect on the inside crossbar, which always releases the latch under a push, so entry security and exit function are handled as two separate questions.

Panic & Exit Hardware near you

Toronto, Ontario

New Toronto information

Town
New Toronto, Toronto, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Old brass keys wear thin, and a key that has bent for years finally lets go in a cold cylinder. In older housing stock this is a regular call, so the locksmith is ready to extract the piece, check the cylinder and cut a new key from the code.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Condo boards commonly set rules about what may be changed on the outside face of a suite door. A locksmith experienced with attached housing knows to keep the visible hardware within those rules while still upgrading the cylinder and strike behind it.

Source: Statistics Canada, 2021 Census of Population

Open New Toronto in Google Maps

Open 24/7

Request a visit

After the fit-out, the gym floor now holds more people than the old office space ever did, and the exit door at the back still has the same turn-lock it had when the room held desks.

Call now · open 24/7(289) 805-5275
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business