Skip to content
Alderwood Lock & Key SpecialistsRequest a visit
Open 24/7(289) 805-5275Call now
Person holding a rectangular door-hardware housing at a table with additional metal assemblies beside a glass entrance. — Access Control Installation, Mimico

Plan ahead Commercial · Mimico

Access Control Installation in Mimico

The team has grown past the point where one shared key still makes sense. New hires need a way in before a manager arrives, and the current setup cannot tell one person's entry from another's.

Call now · open 24/7(289) 805-5275

Request a visit

In plain words

Locking hardware varies by opening: an electric strike, fitted into the existing frame, keeps the mechanical latch and releases it briefly for a valid credential; a magnetic lock clamps the door shut with an electromagnet and suits a frame or door that will not take a strike; and some openings use an electromechanical lock or a different controlled lockset entirely. Several of these can also be fitted with a mechanical override cylinder, so a lost signal, a dead battery, or a controller fault still leaves that particular door opening by key, though the option depends on the hardware chosen for it.

Sound familiar?

You just leased the empty unit next door and want the new tenant to open their own suite without a key to yours, to the loading dock, or to the electrical room down the hall.

How the visit goes

Access Control Installation · Mimico

How the visit goes

Metal key-cutting machine with a key clamped in its vise, a clear guard over the cutter and a black handle. — Mimico
  1. 1

    Sorting out a shared entrance

    In a multi-tenant building, the survey has to account for doors that are not fully any one tenant's to control: a shared lobby, a parking garage entrance, a rooftop or mechanical room a landlord manages separately. The locksmith works out with the property manager and each tenant which credentials belong on which controller, so a tenant's staff can reach their own suite without gaining access to another business's space or to areas the landlord keeps under its own control, and so a departing tenant's credentials can be removed without touching anyone else's.

  2. 2

    Commissioning day: training the people who will run it

    The last step is not technical: it is sitting down with whoever will administer the system and walking through adding a person, revoking a lost card, pulling an entry log for a specific door and date, and changing a schedule for an upcoming holiday or event. The locksmith answers questions on the spot rather than leaving a manual to be read later, confirms the administrator account works with full access, and leaves contact information for anything that comes up once the system has settled into daily use.

  3. 3

    Reading the entry log

    Every controller keeps a record of which credential was presented at which door and when, and, where a door position switch is fitted, whether the door actually opened; that log is available to the administrator whenever it is needed, not only after something has gone wrong. Pulling a recent day's entries for the stockroom, checking whether the loading dock was opened outside its scheduled window, or confirming a contractor's credential was only used on the days they were on site are ordinary lookups rather than a special request, though the record shows the credential used rather than proof of who held it. Reviewing the log occasionally, rather than only when there is a problem, is a genuinely useful habit.

In the van

  • Low-voltage cable
  • Power supply with battery backup
  • Request-to-exit devices
  • Credential cards and fobs
  • Card and fob readers

What affects the quote

  1. 1

    Room left for future doors

    Sizing the controller and power supply with some spare capacity for a door or two added later costs a little more at installation but avoids a second controller purchase when the building later adds an opening.

  2. 2

    How many schedules and access levels are needed

    A building with one schedule for everyone is quicker to configure than one splitting doors, hours and roles into several access levels, since each combination has to be set up and then tested on its own.

  3. 3

    The building's age and frame material

    A modern hollow metal frame generally accepts new hardware with less adjustment than an older wood frame or a historic building, where matching the existing appearance and construction takes extra care.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 805-5275

Access Control Installation: questions

Advice · (289) 805-5275

Will this work with our existing alarm or camera system?

In most cases, yes. An access control installation can be planned to share information with an existing alarm panel, so an arm-or-disarm event lines up with whoever unlocked the door, and with a camera system, so a recorded clip can be matched to a specific credential rather than only a timestamp. The exact integration depends on what the existing alarm and camera equipment support.

Can different doors run on different schedules?

Yes, and this is one of the more useful parts of the system. A front office can unlock for regular business hours, a stockroom can allow only two credentials at any hour, and a loading dock can release only during a set delivery window. Schedules are set per door and per access level in the controller, and can be changed at any time without touching the hardware itself.

Can the system be expanded to more doors later?

Yes. A system installed with some spare capacity in its controller and power supply can usually take another door or two by adding a reader and lock and wiring it back in. A door far from the existing wiring can instead run its own standalone unit. Either way, existing schedules and credentials do not need to be rebuilt from scratch.

Access Control Installation near you

Toronto, Ontario

Mimico information

Town
Mimico, Toronto, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Established homes often have non-standard bores and backsets from an earlier generation of hardware. A locksmith working in such an area carries adapter plates and cylinders in the older sizes, so an upgrade fits the existing door instead of forcing a new one.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Where most people live in townhouses, apartments or condos, doors come in two kinds: the suite door you control and the shared entrances the building manages. A locksmith works on your door freely and coordinates with management on the rest.

Source: Statistics Canada, 2021 Census of Population

Open Mimico in Google Maps

Open 24/7

Request a visit

The team has grown past the point where one shared key still makes sense.

Call now · open 24/7(289) 805-5275
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business