Skip to content
Alderwood Lock & Key SpecialistsRequest a visit
Open 24/7(289) 805-5275Call now
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Toronto

Change or rekey · Toronto

Lock Replacement & Upgrade

Three teenagers, a dog walker, a cleaner and one house key that keeps going missing. You are tired of cutting copies and would rather give each person a code you can switch off, with a proper deadbolt behind it.

Call now · open 24/7(289) 805-5275

Request a visit

In plain words

A keypad or smart lock is a lock replacement with a few extra steps, and it suits households where keys circulate widely. The locksmith fits the new deadbolt to the existing bore, checks that the bolt throws freely so the motor is never straining against a misaligned strike, sets up user codes and any phone pairing, and shows you the mechanical override and the battery warning. Because these locks still rely on a bolt and a strike, the same attention goes into the frame as for any deadbolt. You gain convenience without giving up the mechanical basics that make a door hard to force.

Sound familiar?

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn. It has been getting worse for a year, and this week it took three tries in the cold before the deadbolt finally gave.

How the visit goes

Lock Replacement & Upgrade · Toronto

How the visit goes

Metal key-cutting machine with a key clamped in its vise, a clear guard over the cutter and a black handle.
  1. 1

    Who is asking for the change

    The first check is about the person, not the door. An owner can change any lock on their home. A tenant who wants new hardware on the unit door needs the landlord's agreement, and a landlord who changes a lock while a tenant lives there hands over new keys. The locksmith asks which situation applies and, where paperwork helps, looks at identification, a deed, a lease or a property-management note. It takes a minute and it means the new lock goes on with everyone who has a stake in the door knowing about it, which is exactly how a lock should start its working life.

  2. 2

    Adapting older and unusual doors

    Not every door is a standard modern slab. A century home with a mortise lock may keep its case and get a new cylinder and strike, or take a filler plate that lets a cylindrical deadbolt sit where the old case was, without hacking at the original stile. A door thicker than 45 millimetres gets extended spindles and screws. A sliding patio door gets a replacement mortise hook lock or a keyed surface bolt sized to the rail. Steel and fibreglass doors are drilled only with the right bits and a jig, and a new deadbolt above an existing knob is bored with a template so it sits square.

  3. 3

    Keys counted, named and planned

    You receive the agreed number of keys, cut from the new pinning and tried in every door they should open, plus any code cards for a restricted system, which are what future copies are cut from. It is worth deciding on the spot who gets one and where the spare lives, ideally with a trusted neighbour or in a lockbox rather than in a drawer inside. If the house is now on a single key, retire every old key so none can be confused with the new one. A written list of which key does what goes in the home file.

In the van

  • Filler plates and thick-door extension kits
  • Chisels, mallet and hand screwdrivers
  • Adjustable latch or bolt
  • Reinforced strike plate and strike box
  • Cylinders, plug follower and pinning kit

What affects the quote

  1. 1

    Changes to the door preparation

    Adjusting a strike mortise is minor; boring a new hole for a deadbolt, fitting a filler plate over an old mortise pocket or adapting a thick door with extension kits is quoted as its own item.

  2. 2

    Patio and French door hardware

    Sliding door mortise locks, foot bolts and flush bolts for an inactive French door leaf are specialty items sized to the door, and they are quoted as their own line beside the entrance work.

  3. 3

    Strike reinforcement and jamb repair

    A reinforced strike with long screws is a modest addition; repairing a jamb split from a forced entry, or fitting a strike box into a frame that has never had one, adds labour and materials.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 805-5275

Lock Replacement & Upgrade: questions

Advice · (289) 805-5275

My door has glass beside it. Should I fit a deadbolt keyed on both sides?

A keyed interior cylinder means finding a key to get out, which is not what you want on a door people use every day. The steadier answer for a door with glass is a single-cylinder deadbolt with a thumb-turn, combined with a reinforced strike, a longer bolt and a security film or laminated glass in the sidelight.

Can you replace the lock on a sliding patio door or French doors?

Yes. Sliding doors take a replacement mortise hook lock sized to the rail, often with a keyed exterior, and benefit from a secondary foot bolt or a pin through the frames. French doors are secured by treating the inactive leaf properly with flush bolts into the head and sill, then fitting a deadbolt to the active leaf with a strike into that reinforced edge. Both are routine parts of a residential upgrade.

Will a new lock fit the holes already in my door?

Usually, yes. Most residential doors are prepared to standard sizes, a 54 millimetre cross bore and a backset of 60 or 70 millimetres, and most modern hardware adjusts between those backsets. The locksmith measures before choosing, so the new lock is matched to the door rather than the other way around. Where an older mortise lock or an unusual bore is found, filler plates, extension kits or a carefully jigged new bore bring the door to standard.

Lock Replacement & Upgrade near you

Toronto, Ontario

Toronto information

Town
Toronto, Ontario
In business
20 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

In neighbourhoods of established homes, keys have often been copied many times over many owners. Rekeying every exterior door to one fresh key is the common first job, and it works on old cylinders just as well as on new ones.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Where most homes are apartments or condos, storage lockers, bike rooms and parking gates carry their own locks. A locksmith can supply and key padlocks and cam locks for those spaces so one household ring covers everything it uses.

Source: Statistics Canada, 2021 Census of Population

Open Toronto in Google Maps

Open 24/7

Request a visit

Three teenagers, a dog walker, a cleaner and one house key that keeps going missing.

Call now · open 24/7(289) 805-5275
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 20 years in business